1. Ahn I. H., Seung K. M., Hwang J. H. & Bi G., “Characteristic length of the solidified melt pool in selective laser melting process”, Rapid Prototyping Journal, 23(2), 370-381, 2017

2. Amelia L.Y.L, An J., Chua C.K., "Two-Way 4D Printing: A Review on the Reversibility of 3D-Printed Shape Memory Materials", Engineering, 3(5), 663-674, 2017

3. Aphinyan S., Geethalakshmi K.R., Yeo J.J., Shakouri A. and Ng T.Y., “Numerical characterization of ultraviolet ink fluid agglomeration and the surfactant effect in nanoinkjet printing”, Polymers for Advanced Technologies, 28 (9), 1057-1064, 2017

4. Bastola A.K., Hoang V.T. & Li L., “A novel hybrid magnetorheological elastomer developed by 3D printing”, Materials & Design, 114, 391–397, 2017

5. Chua C.K., Zhou K., Wei J., Bai J.M., Yuan S.Q., Shen F., Zhang B.C., “Toughening of polyamide 11 with carbon nanotubes for additive manufacturing”, Virtual and Physical Prototyping, 12(3), 235-240, 2017

6. Chua Z.Y., Ahn I. H. & Seung K. M., “Process monitoring and inspection systems in metal additive manufacturing: status and applications,” International Journal of Precision Engineering and Manufacturing-Green Technology, 4(2), 235-245, 2017

7. Eng H., Maleksaeedi S., Yu S., Choong Y. Y. C., Wiria F. E., Kheng R., Wei J., Su P. C. & Tham H. J., "Development of CNTs-filled photopolymer for projection stereolithography", Rapid Prototyping Journal, 23(1), 129-136, 2017

8. Gan M. X. & Wong C. H., "Properties of selective laser melted spodumene glass-ceramic", Journal of the European Ceramic Society, 37(13), 3823–4240, 2017

9. Goh G.L., Agarwala S., Goh G.D., et al. "Additively manufactured multi-material free-form structure with printed electronics," The International Journal of Advanced Manufacturing Technology, 1-8, 2017

10. Goh G. D., Agarwala S., Goh G. L., V. Dikshit, S.L. Sing & Yeong W. Y., "Additive manufacturing in unmanned aerial vehicles (UAVs): challenges and potential", Aerospace Science and Technology, 63, 140-151, 2017 

11. Ho C. M. B., Mishra A., Lin P. T. P., Ng S. H., Yeong W. Y., Kim Y. J. & Yoon Y. J., "3D printed polycaprolactone carbon nanotube composite scaffolds for cardiac tissue engineering", Macromolecular Bioscience, 17(4), 1600250, 2017

12. Lee H., Lim C. H. J. , Low M. J. , Tham N. , Matham M. V. and Kim Y. J. , “Lasers in additive manufacturing: A review,” International Journal of Precision Engineering and Manufacturing-Green Technology, 4(3), 307-322, 2017

13. Lee, J.Y., An, J., Chua, C.K., “Fundamentals and applications of 3D printing for novel materials”, Applied Materials Today, 7, 120-133, 2017

14. Li H., Tan Y. J., Leong K. F. & Li Lin, "3D bioprinting of highly thixotropic alginate/methylcellulose hydrogel with strong interface bonding", ACS Applied Materials & Interfaces, 9(23), 20086-20097, 2017

15. Li Y., Zhou K., Tor S. B., Chua C. K. & Leong K. F., "Heat transfer and phase transition in the selective laser melting process", International Journal of Heat and Mass Transfer, 108, 2408-2416, 2017

16. Lu Q. Y. and Wong C. H., "Additive manufacturing process monitoring and control by non-destructive testing techniques: challenges and in-process monitoring", Virtual and Physical Prototyping, 1-10, 2017Measurement of tensile bond strength of 3D printed geopolymer mortar

17. Lu Q. Y. and Wong C. H., "Applications of non-destructive testing techniques for post-process control of additively manufactured parts," Virtual and Physical Prototyping, 12(4), 301-321, 2017

18. Mogali SR, Yeong WY, Tan HKJ, Tan GJS, Abrahams PH, Zary N, Low-Beer N, Ferenczi MA, "Evaluation by medical students of the educational value of multi-material and multi-colored three dimensional (3D) printed model of the upper limb for anatomical education", Anatomical Sciences Education, Accepted, 2017

19. Mohit M., Erdal K., “Receding horizon control of a 3 DOF helicopter using online estimation of aerodynamic parameters”, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 1-12, Accepted, 2017

20. Ng W. L., Lee J. M., Yeong W. Y., and May W. N.,"Microvalve-based bioprinting–process, bio-inks and applications", Biomaterials Science, 4, 632-647, 2017

21. Ng W. L., Yeong W. Y., and May W. N., "Polyvinylpyrrolidone-based bio-ink improves cell viability and homogeneity during drop-on-demand printing", Materials (Basel), 10(2), 190, 2017

22. Panda B., Paul S.C., Hui L.J., Tay Y.W.D., Tan M.J, “Additive manufacturing of geopolymer for sustainable built environment”, Journal of Cleaner Production, 167, 281–288, 2017

23. Panda B., Paul S.C., Tan M.J., “Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material”, Materials Letters, 209, 146–149, 2017

24. Paul S.C., Van Z.J., G.P.A.G., Tan M.J., Gibson I., “A review on 3D concrete printing systems and materials properties: Current Status and Future Research Prospects”, Rapid Prototyping Journal, 2017

25. Pham H. and Pham Q.C., “Robotic manipulation of a rotating chain,” IEEE Trans. Robot., Apr. 2017

26. Pham M. T., Teo T. J.  & Yeo S. H., "Synthesis of multiple degrees-of-freedom spatial-motion compliant parallel mechanisms with desired stiffness and dynamics characteristics", Precision Engineering, 47, 131-139, 2017

27. Pham M.T., Teo T.J., Yeo S.H., Wang P., Nai M.L.S., “A 3d-printed ti-6al-4v 3-dof compliant parallel mechanism for high precision manipulation”, IEEE/ASME Transactions on Mechatronics, 22(5), 2359–2368, 2017

28. Saengchairat, N., Tran, T., & Chua, C. K., “A review: Additive manufacturing for active electronic components”, Virtual and Physical Prototyping, 12(1), 31-46, 2017

29. Sing S. L., Yeong W. Y., Wiria E. F., Tay B. Y., Zhao Z., Zhao L., Tian Z. & Yang S., "Direct selective laser sintering and melting of ceramics: a review", Rapid Prototyping Journal, 23(3), 611-623, 2017

30. Suntornnond R., An J. & Chua C. K., "Bioprinting of thermo-responsive hydrogels for next generation tissue engineering: A review", Macromolecular Materials and Engineering, 302(1), 1600266, 2017

31. Suntornnond, R., An J., & Chua C.K., “Roles of support materials in 3D bioprinting–present and future”, International Journal of Bioprinting, 3(1), 83-86, 2017

32. Jang T.S., Jung H.D., Houwen M. P., Han W. T., Chen S.Y. & Song J.H. "3D printing of hydrogel composite systems: Recent advances in technology for tissue engineering", 4(1), 1-28, International Journal of Bioprinting, 2017

33. Tan X., Tan Y. J., Shi L. C. C., Tor S. B. & Yeong W. Y., "Metallic powder-bed based 3D printing of cellular scaffolds for orthopaedic implants: A state-of-the-art review on manufacturing, topological design, mechanical properties and biocompatibility", Materials Science & Engineering C., 76, 1328–1343, 2017

34. Tay Y.W.D., Panda B., Paul S.C., Nisar A. N. M., Tan M.J., and Leong K.F., “3D printing trends in building and construction industry: a review”, Virtual and Physical Prototyping, 12(3), 261-276, 2017

35. Tran V.T., Wei, Y., Liau W., Yang H., Du H., “Preparing of Interdigitated Microelectrode Arrays for AC Electrokinetic Devices Using Inkjet Printing of Silver Nanoparticles Ink”, Micromachines, 8(4), 106, 2017

36. Tran V.T., Yue F. W., Hong Y. Y., Zhao Y. Z., He J.D., “All-inkjet-printed flexible ZnO micro photodetector for a wearable UV monitoring device”, Nanotechnology, 28 (9), 095204, 2017

37. Teoh J. E. M., An J., Chua C. K., Lv M., Krishnasamy V., & Liu Y., “Hierarchically self-morphing structure through 4D printing”, Virtual and Physical Prototyping, 12(1), 61-68, 2017

38. Teoh J. E. M., Chua C. K., Liu Y. & An, J., “4D printing of customised smart sunshade: A conceptual study”, In Challenges for Technology Innovation: An Agenda for the Future, CRC Press, 105-108, 2017

39. Teoh J.E.M., et al., “Multi-stage responsive 4D printed smart structure through varying geometric thickness of shape memory polymer”, Smart Materials and Structures, 26(12), 125001, 2017

40. Tian X., Jun J., Yuan S., Chua C. K., Tor S. B. & Zhou K., "Emerging 3D-printed electrochemical energy storage devices: a critical review", Advanced Energy Materials, 7(17), 1700127, 2017

41. Vishwesh D., Nagalingam A.P., Yap Y. L., Sing S. L., Yeong W. Y. & Jun W., "Investigation of quasi-static indentation response of inkjet printed sandwich structures under various indenter geometries", Materials (Basel), 10(3), 290, 2017

42. W. S. Tan, Stanislaus R. S., An J., Chua C.K., Anthony G. Fane, Tzyy Haur Chong, “Comparison of solid, liquid and powder forms of 3D printing techniques in membrane spacer fabrication”, Journal of Membrane Science, 537, 283-296, Accepted, 2017

43. Wei J., Choong Y.Y.C., Maleksaeedi S., Eng H., Su P.C., “4D Printing of High Performance Shape Memory Polymer using Stereolithography”, Materials and Design, 2017

44. Yao X., Seung K. M. & Bi G., “A hybrid machine learning approach for additive manufacturing design feature recommendation,” Rapid Prototyping Journal, 23(6), 2017

45. Yao X., Seung K. M. & Bi G., “Multidisciplinary design optimization to identify additive manufacturing resources in customized product development,” Journal of Computational Design and Engineering, 4(2), 131–142, 2017

46. Yap Y. L., Tan Y. S. E., Tan H. K. J., Peh Z. K., Low X. Y., Yeong W. Y., Tan S. H. C. & Laude A., "3D printed bio-models for medical applications", Rapid Prototyping Journal, 23(2), 227-235, 2017

47. Yuan S., Shen F., Bai J., Chua C. K., Wei J. & Zhou K., "3D soft auxetic lattice structures fabricated by selective laser sintering: TPU powder evaluation and process optimization", Materials & Design, 120, 317-327, 2017

48. Zhang M., Sun C.N., Zhang X., Goh P.C., Wei J., Hardacre D., Li H., “Elucidating the relations between monotonic and fatigue properties of laser powder bed fusion stainless steel 316L”, The Journal of The Minerals, Metals & Materials Society, 68(799), 2017

49. Zhang M., Sun C.N., Zhang X., Goh P.C., Wei J., Hardacre D., Li H., “Fatigue and fracture behaviour of laser powder bed fusion stainless steel 316L: Influence of processing parameters”, Materials Science and Engineering, A 703, 251-261, 2017